Filters
Close

Rochester Liquid Level Gauge Assembly for 12" Diameter Receiver

SKU: HM8443-00054

Download Cut Sheet

Download Installation Instructions

 

HM8443 series side mounted refrigerant level gauges are equipped with proportional voltage output or voltage output TwinSite® sender capsules with ranges of 1-2 volts, 1-6 volts or 0.5 to 4.5 volts output Hall Effect. They interface with various microprocessor based controllers now being used in commercial/supermarket applications for continuous, repeatable measurement of refrigerant levels and rates of loss.

These gauges feature a 4-bolt brass head with integral mounting pads to accommodate the attachment of an electrical junction box. The junction boxes furnished with these gauges are not watertight and it is recommended that the connections inside boxes be made using waterproof connectors for rooftop and other outdoor service applications.

These gauges are typically furnished with neoprene gaskets which are compatible with several commonly used refrigerants and lubricants. Other gasket materials may be available.

The dials furnished with these gauges are magnetically driven. This means that the dials may be removed and replaced by removing two #6-32 screws and without disturbing the four gauge mounting bolts and releasing receiver contents.

The dials on gauges orignally equipped with direct read or direct read plus voltage output are typically interchangeable. In other words, a 1-2 volt output dial could be replaced with a 0.5 to 4.5 volt Hall Effect dial by removing only two #6-32 screws.

Hall Effect dials with 0.5 to 4.5 volt output introduce previously unavailable levels of noise free reliability and longevity. All dials with direct read only and direct read with voltage output are for use in both indoor and outdoor locations.

Features:

  • A complete Rochester Liquid Level Gauge assembly
  • Used on horizontal receivers with a four bolt mounting flange
  • A float arm to fit 12 inch receiver diameter
  • Requires 8-24VDC power source
  • Produces a 1-2VDC linear signal
  • Suitable for CPC and Danfoss applications
  • Alternative replacement Liquid Level Gauge is the Refri-Shield™ 12" Liquid Level Gauge part number RSG-12ECR
  • Direct replacement for Hussmann part number E208060

Technical Specifications:

  • Temperature Range: Standard range is -40°F to 158°F, -40°C to 70°C.
  • Mounting: Rochester Senior® adapter (typically part # 0022-05200).
  • Voltage Input: 24 VDC maximum.
  • Working Pressure: 450psig [31 Bar].
  • Approvals: UL recognized refrigeration component.
  • Part Number: HM8443-00054

 

Model
Output
Tank Depth
HM8443-00053
1-2 Volt
10″
HM8443-00054
1-2 Volt
12″
HM8443-00055
1-2 Volt
14″
HM8443-00057
1-6 Volt
12″
HM8443-00058
1-6 Volt
14″